Difference between revisions of "Contrib:Claws/Code Aster/10 x cases"

Revision as of 13:20, 17 February 2011

<-Link: Back to Contrib:Claws/Code_Aster

Contents

Software used:

• Ubuntu 9.10 64bit
• Salomé 5.1.3 for preparation of the geometry, meshing and post-processing.
• Code_Aster 10.1.x 64bit, compiled with the GCC compiler for calculation

Computer used:

• Dual core Intel 2.9GHz with 4Gb of RAM

I have tried to comment the *.comm files as well as I could, but I am far from an expert on C_A so use these files only as an example of the file structure/the C_A way of thinking.

Piston tutorial

I have updated the original piston tutorial also found on this wiki, to comply with SaloméMECA 2010.2 - A great introduction for absolute beginners to SaloméMECA and Code_Aster

Tutorial in PDF format - Updated for SaloméMECA 2010.2 Media:Piston_tutorial.pdf

Applying Torque and using parameters

This case deals with applying torque to an object in a non-linear calculation and using parameters to control the calculation.

Link: Applying torque

Includes:

• Applying torque - LIAISON_SOLIDE
• Using parameters
• Non-linear calculation
• Creating an animated GIF file of the result.

Using the command LIAISON_ELEM

Apply the command LIAISON_ELEM using beams to substitute 3D geometry to reduce the work load of a calculation and simplify geometry

Link: Using the command LIAISON_ELEM

Includes:

• LIAISON_ELEM:Connecting 3D structures to 1D elements; using beams to substitute 3D geometry
• Describing geometry with AFFE_CARA_ELEM
• LIAISON_UNIF

Simulating a two segment pendulum with DYNA_NON_LINE

A short introduction to using DYNA_NON_LINE to simulate a two segment pendulum.

Link: Two segment pendulum with DYNA_NON_LINE

Includes:

• Cables
• DYNA_NON_LINE
• Tracing curves with Code_Aster and XMGrace