Difference between revisions of "Contrib:KeesWouters/stress 2D3D"
Keeswouters (Talk | contribs) m (→''The geometry, mesh and command files'') |
Keeswouters (Talk | contribs) m (→''The geometry, mesh and command files'') |
||
| Line 11: | Line 11: | ||
==''The geometry, mesh and command files''== | ==''The geometry, mesh and command files''== | ||
| − | The geometry, mesh and command files are entirely based on the solid connecting between the shell and volumes elements described here [http://www. | + | The geometry, mesh and command files are entirely based on the solid connecting between the shell and volumes elements described here [http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/shellsolid]. |
Revision as of 15:05, 11 December 2009
The connection between shell and solid elements
[under construction .... not finished yet ... might be usable though ... ]
To start with, this contribution mainly focuses on the use of Salome and Code Aster, not on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to the fifth decimal place, which they are not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.
I stole a lot of ideas from the CaeLinux and Code Aster forums. So thank you for all who posted on this topic.
[As usual, the files that define the geometry, mesh and command files can be found at the end of this contribution.]
The geometry, mesh and command files
The geometry, mesh and command files are entirely based on the solid connecting between the shell and volumes elements described here [1].
