Difference between revisions of "Contrib:KeesWouters/spring"

From CAELinuxWiki
Jump to: navigation, search
('''Spring construction''')
('''Spring construction''')
Line 5: Line 5:
 
[[image:kw_spring400a.jpg]] * [[image:kw_spring_mesh400.jpg]]
 
[[image:kw_spring400a.jpg]] * [[image:kw_spring_mesh400.jpg]]
  
The outer rectangular plate together with the spring leaves consists of the same face. The inner rectangulare plate is a different face and has set different wall thickness in the C-A command file.
+
The outer rectangular plate together with the spring leaves consists of the same face. The inner rectangulare plate is a different face and has set different wall thickness in the C-A command file. In the picture at the right hand side the transition between the two part is clearly visible with the straight mesh line.

Revision as of 14:14, 11 June 2009

Spring construction

The spring construction consists of two rectangular plates with four spring leaves between them. The springs are symmetrical with respect to forces in x, y and z directions.

Kw spring400a.jpg * Kw spring mesh400.jpg

The outer rectangular plate together with the spring leaves consists of the same face. The inner rectangulare plate is a different face and has set different wall thickness in the C-A command file. In the picture at the right hand side the transition between the two part is clearly visible with the straight mesh line.