Contrib:KeesWouters/shell/plotcoq3d
From CAELinuxWiki
Post processing of COQUE-3D calcalation
[under construction]
In this contribution the main (and only) focus is on the postprocessing of the displacements and stresses of shell COQUE-3D elements. The centre nodes of tria7 and quad9 elements used for the discription of the displacements field of COQUE_3D poses some nasty problems in the postprocessing with Salome. To overcome this problem the results are projected on the original quadratic mesh without the centre node.
- preproccesing:
- definition of geometry in Salome
- partitioning of the geometry and groups
- meshing of the geometry
- definition of the groups
- (maybe: python script which makes editing much easier ...)
- static analysis with pressure or force applied on a group or nodes
- postprocessing:
- viewing displacement in Salome
- determination of stresses, see also tables
- interface ASTK
Definition of the geometry
planar shell
Geometry:
- L = 11.38 m
- Thickness = 0.55 m
Boundary conditions and loads:
- all dof fixed on short side Lxm: (DX=0.0, DY=0.0, DZ=0.0, DRX=0.0, DRY=0.0, DRZ=0.0)
- prescribed vertical displacement fixed on short side Lxp (DZ=Zdisp)
Material:
Steel
- E = 210e9 Pa
- Nu = 0.3