Difference between revisions of "Contrib:Johnnygeling/springplate"
From CAELinuxWiki
Johnnygeling (Talk | contribs) m (→'''The geometry and the mesh of the construction''') |
Johnnygeling (Talk | contribs) m (→'''The geometry and the mesh of the construction''') |
||
Line 10: | Line 10: | ||
==='''The geometry and the mesh of the construction'''=== | ==='''The geometry and the mesh of the construction'''=== | ||
The description of this problem is shown in the picture: | The description of this problem is shown in the picture: | ||
+ | |||
[[Image:shell_spring_problem_description.png]] | [[Image:shell_spring_problem_description.png]] | ||
Revision as of 23:12, 20 April 2010
Contents
Sheetmetal spring with contact (shell elements with contact)
under construction (johnnygeling 10:09, 17 April 2010 (CEST))
Introduction
This contribution mainly focuses on the use of Salome, Code Aster and particular howto deal with shell elements and contact. So I do not focus on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to five decimal places, which they are probably not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.
The geometry
The geometry and the mesh of the construction
The description of this problem is shown in the picture: