Difference between revisions of "Contrib:Johnnygeling/springplate"

From CAELinuxWiki
Jump to: navigation, search
m ('''The geometry and the mesh of the construction''')
m ('''The geometry and the mesh of the construction''')
Line 12: Line 12:
  
 
[[Image:shell_spring_problem_description.png]]
 
[[Image:shell_spring_problem_description.png]]
 +
 +
===='''The mesh'''====
 +
The mesh is divided in three components:
 +
*drive
 +
*bladveer
 +
*wall
 +
The assemble mesh is shown:
 +
[[Image:Mesh assy.png]]
  
 
=='''The model'''==
 
=='''The model'''==

Revision as of 21:36, 21 April 2010

Sheetmetal spring with contact (shell elements with contact)

under construction (johnnygeling 10:09, 17 April 2010 (CEST))

Introduction

This contribution mainly focuses on the use of Salome, Code Aster and particular howto deal with shell elements and contact. So I do not focus on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to five decimal places, which they are probably not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.

The geometry

The geometry and the mesh of the construction

The description of this problem is shown in the picture:

Shell spring problem description.png

The mesh

The mesh is divided in three components:

  • drive
  • bladveer
  • wall

The assemble mesh is shown: Mesh assy.png

The model

coque_3d

coque_3d

contact

Result