Difference between revisions of "Contrib:Johnnygeling/springplate"

From CAELinuxWiki
Jump to: navigation, search
 
Line 1: Line 1:
=='''Mesh refinement of a beam based on displacement'''==
+
=='''Sheetmetal spring with contact (shell elements with contact)'''==
  
['''Introduction ''']
+
=='''Introduction '''==
  
This contribution mainly focuses on the use of Salome, Code Aster and its macro command ''MACR_ADAP_MAIL''. So I do not focus on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to five decimal places, which they are probably not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.
+
This contribution mainly focuses on the use of Salome, Code Aster and particular howto deal with shell elements and contact. So I do not focus on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to five decimal places, which they are probably not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.
  
 
=='''The geometry'''==
 
=='''The geometry'''==
 
==='''The geometry and the mesh of the construction'''===
 
==='''The geometry and the mesh of the construction'''===
 +
 +
 +
 +
=='''The model'''==
 +
==='''coque_3d'''===
 +
==='''coque_3d'''===
 +
==='''contact'''===
 +
==''Result''==

Revision as of 09:03, 17 April 2010

Sheetmetal spring with contact (shell elements with contact)

Introduction

This contribution mainly focuses on the use of Salome, Code Aster and particular howto deal with shell elements and contact. So I do not focus on the results and the mechanical justifications of the code that has been used. So no guarantee that the results will be correct up to five decimal places, which they are probably not. I do hope though that this information is useful. For me it has been, because I had to think about some commands and look through the documentation and learn from that. In case of mistakes, errors or remarks, please notify me, or better, you are invited to correct or edit them yourself. Enjoy.

The geometry

The geometry and the mesh of the construction

The model

coque_3d

coque_3d

contact

Result