Contrib:KeesWouters/shell

• Contrib:KeesWouters
  
  
  

Shell analysis

1. Dynamic shell analysis
   
   • Contrib:KeesWouters/shell/platedynamics
     
   • Use of shell coque_3d elements
     This contribution is an dynamic analysis of a plate modelled by shell -coqued_3d- elements
     key words:
     
     • use of Salome: definition of geometry, mesh - export of mesh
       
     • use of ASTK
       
     • conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)
       
     • projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements
       
     • definition of:
       
       • shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
         
       • mass, stiffnes matrix and range of dof, NUME_DDL
         
       • definition of eigenvalue extraction -
         
     • print mass table
       
2. Static analysis of shell construction
   
   • Contribution in collaboration with Brigde.
     Concrete shell with several partitions loaded by pressure.
     Extraction of displacement and stresses.
     Contrib:KeesWouters/shell/static
3. Static shell analysis - generation of tables
   
   • Contribution in collaboration with Brigde.
     Concrete shell with several partitions loaded by pressure.
     Focus on extraction of minimum and maximum displacements, forces and moments and stresses.
     Contrib:KeesWouters/shell/tables
4. Plot results of shell COQUE_3D calculations
   
   • The centre node of COQUE-3D elements is a headache in postpro.
     Projecting the results to a mesh without centre nodes.
     Presented on a plate with four holes.
     Focus on displacements and stresses.
     Contrib:KeesWouters/shell/plotcoq3d (April 2013)
5. Static analysis of shell construction
   
   • Contrib:KeesWouters/shell/static/command
     
     
6. Connection between shells and solids - Liaisonmail
   
   • Contrib:KeesWouters/shell/liaisonmail
     
     
7. Connection between shells and solids - Arlequin
   
   • This method is obsolete and has been replaced by a method given in o (6) Contrib:KeesWouters/shell/liaisonmail
     Contrib:KeesWouters/shell/arlequin
     
     
8. Partitioning of shell for areas
   
   • Contrib:KeesWouters/shell/shellpartition