Difference between revisions of "Contrib:KeesWouters/shell"
From CAELinuxWiki
Keeswouters (Talk | contribs) m |
Keeswouters (Talk | contribs) m (→Shell analysis) |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 18: | Line 18: | ||
#* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Focus on extraction of minimum and maximum displacements, forces and moments and stresses.<br/>[[Contrib:KeesWouters/shell/tables]] | #* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Focus on extraction of minimum and maximum displacements, forces and moments and stresses.<br/>[[Contrib:KeesWouters/shell/tables]] | ||
# '''Plot results of shell COQUE_3D calculations'''<br/> | # '''Plot results of shell COQUE_3D calculations'''<br/> | ||
| − | #* The centre node of COQUE-3D elements is a headache in postpro.<br/> Projecting the results to a mesh without centre nodes.<br/> Presented on a plate with four holes.<br/> Focus on displacements and stresses.<br/>[[Contrib:KeesWouters/shell/plotcoq3d]] | + | #* The centre node of COQUE-3D elements is a headache in postpro.<br/> Projecting the results to a mesh without centre nodes.<br/> Presented on a plate with four holes.<br/> Focus on displacements and stresses.<br/>[[Contrib:KeesWouters/shell/plotcoq3d]] (April 2013) |
| + | # '''Plot results of shell COQUE_3D calculations'''<br/> | ||
| + | #* Roughly the same as previous contribution - using ParaVis.<br/>[[Contrib:KeesWouters/shell/plotcoq3dparavis]] (August 2013) | ||
# '''Static analysis of shell construction'''<br/> | # '''Static analysis of shell construction'''<br/> | ||
#* [[Contrib:KeesWouters/shell/static/command]]''<br/><br/> | #* [[Contrib:KeesWouters/shell/static/command]]''<br/><br/> | ||
| Line 24: | Line 26: | ||
#* [[Contrib:KeesWouters/shell/liaisonmail]]''<br/><br/> | #* [[Contrib:KeesWouters/shell/liaisonmail]]''<br/><br/> | ||
# '''Connection between shells and solids - Arlequin'''<br/> | # '''Connection between shells and solids - Arlequin'''<br/> | ||
| − | #* This method is obsolete<br/>[[Contrib:KeesWouters/shell/arlequin]]''<br/><br/> | + | #* This method is obsolete and has been replaced by a method given in<br/> o (7) [[Contrib:KeesWouters/shell/liaisonmail]] <-- [[Contrib:KeesWouters/shell/arlequin]]''<br/><br/> |
# '''Partitioning of shell for areas'''<br/> | # '''Partitioning of shell for areas'''<br/> | ||
#* [[Contrib:KeesWouters/shell/shellpartition]]<br/><br/> | #* [[Contrib:KeesWouters/shell/shellpartition]]<br/><br/> | ||
Latest revision as of 18:36, 23 September 2013
Shell analysis
- Dynamic shell analysis
- Contrib:KeesWouters/shell/platedynamics
- Use of shell coque_3d elements
This contribution is an dynamic analysis of a plate modelled by shell -coqued_3d- elements
key words:
- use of Salome: definition of geometry, mesh - export of mesh
- use of ASTK
- conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)
- projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements
- definition of:
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- mass, stiffnes matrix and range of dof, NUME_DDL
- definition of eigenvalue extraction -
- shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
- print mass table
- use of Salome: definition of geometry, mesh - export of mesh
- Contrib:KeesWouters/shell/platedynamics
- Static analysis of shell construction
- Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Extraction of displacement and stresses.
Contrib:KeesWouters/shell/static
- Contribution in collaboration with Brigde.
- Static shell analysis - generation of tables
- Contribution in collaboration with Brigde.
Concrete shell with several partitions loaded by pressure.
Focus on extraction of minimum and maximum displacements, forces and moments and stresses.
Contrib:KeesWouters/shell/tables
- Contribution in collaboration with Brigde.
- Plot results of shell COQUE_3D calculations
- The centre node of COQUE-3D elements is a headache in postpro.
Projecting the results to a mesh without centre nodes.
Presented on a plate with four holes.
Focus on displacements and stresses.
Contrib:KeesWouters/shell/plotcoq3d (April 2013)
- The centre node of COQUE-3D elements is a headache in postpro.
- Plot results of shell COQUE_3D calculations
- Roughly the same as previous contribution - using ParaVis.
Contrib:KeesWouters/shell/plotcoq3dparavis (August 2013)
- Roughly the same as previous contribution - using ParaVis.
- Static analysis of shell construction
- Connection between shells and solids - Liaisonmail
- Connection between shells and solids - Arlequin
- This method is obsolete and has been replaced by a method given in
o (7) Contrib:KeesWouters/shell/liaisonmail <-- Contrib:KeesWouters/shell/arlequin
- This method is obsolete and has been replaced by a method given in
- Partitioning of shell for areas
