Difference between revisions of "Contrib:KeesWouters/shell"

From CAELinuxWiki
Jump to: navigation, search
m (→‎Shell analysis)
m (→‎Shell analysis)
 
(23 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
# '''Dynamic shell analysis'''<br/>
 
# '''Dynamic shell analysis'''<br/>
 
#*[[Contrib:KeesWouters/shell/platedynamics]]<br/>
 
#*[[Contrib:KeesWouters/shell/platedynamics]]<br/>
−
#* Use of shell coque_3d elements<br/>
+
#* Use of shell coque_3d elements<br/>This contribution is an dynamic analysis of a plate modelled by shell -coqued_3d- elements<br/>key words:<br/>
−
#* This contribution is an simple example of a dynamic plate modelled by shell -coqued_3d- elements<br/>
+
#** use of Salome: definition of geometry, mesh - export of mesh<br/>
−
#** key words:<br/>
+
#** use of ASTK<br/>
−
#***        use of Salome: definition of geometry, mesh - export of mesh<br/>
+
#** conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)<br/>
−
#***        use of ASTK<br/>
+
#** projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements<br/>
−
#***        conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)<br/>
+
#** definition of:<br/>
−
#***        projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements<br/>
+
#*** shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep<br/>
−
#***        definition of:<br/>
+
#*** mass, stiffnes matrix and range of dof, NUME_DDL<br/>
−
#****            shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep<br/>
+
#*** definition of eigenvalue extraction - <br/>
−
#****            mass, stiffnes matrix and range of dof, NUME_DDL<br/>
+
#** print mass table<br/>
−
#****            definition of eigenvalue extraction - <br/>
+
# '''Static analysis of shell construction'''<br/>
−
#***        print mass table<br/>
+
#* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Extraction of displacement and stresses.<br/>[[Contrib:KeesWouters/shell/static]]
−
# '''Static analysis of shell construction'''<br/>* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Extraction of displacement and stresses.<br/>[[Contrib:KeesWouters/shell/static]]
+
# '''Static shell analysis - generation of tables'''<br/>
−
# '''Static shell analysis - generation of tables'''<br/>* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Focus on extraction of minimum and maximum displacements, forces and moments and stresses.<br/>[[Contrib:KeesWouters/shell/tables]]
+
#* Contribution in collaboration with Brigde.<br/>Concrete shell with several partitions loaded by pressure.<br/>Focus on extraction of minimum and maximum displacements, forces and moments and stresses.<br/>[[Contrib:KeesWouters/shell/tables]]
−
# '''Plot results of shell COQUE_3D calculations'''<br/>* The centre node of COQUE-3D elements is a headache in postpro.<br/> Projecting the results to a mesh without centre nodes.<br/> Presented on a plate with four holes.<br/> Focus on displacements and stresses.<br/>[[Contrib:KeesWouters/shell/plotcoq3d]]
+
# '''Plot results of shell COQUE_3D calculations'''<br/>
−
# '''Static analysis of shell construction'''<br/>[[Contrib:KeesWouters/shell/static/command]]''<br/><br/>
+
#* The centre node of COQUE-3D elements is a headache in postpro.<br/> Projecting the results to a mesh without centre nodes.<br/> Presented on a plate with four holes.<br/> Focus on displacements and stresses.<br/>[[Contrib:KeesWouters/shell/plotcoq3d]] (April 2013)
 +
# '''Plot results of shell COQUE_3D calculations'''<br/>
 +
#* Roughly the same as previous contribution - using ParaVis.<br/>[[Contrib:KeesWouters/shell/plotcoq3dparavis]] (August 2013)
 +
# '''Static analysis of shell construction'''<br/>
 +
#* [[Contrib:KeesWouters/shell/static/command]]''<br/><br/>
 +
# '''Connection between shells and solids - Liaisonmail'''<br/>
 +
#* [[Contrib:KeesWouters/shell/liaisonmail]]''<br/><br/>
 +
# '''Connection between shells and solids - Arlequin'''<br/>
 +
#* This method is obsolete and has been replaced by a method given in<br/> o (7) [[Contrib:KeesWouters/shell/liaisonmail]] <-- [[Contrib:KeesWouters/shell/arlequin]]''<br/><br/>
 +
# '''Partitioning of shell for areas'''<br/>
 +
#* [[Contrib:KeesWouters/shell/shellpartition]]<br/><br/>

Latest revision as of 19:36, 23 September 2013

Shell analysis

  1. Dynamic shell analysis
    • Contrib:KeesWouters/shell/platedynamics
    • Use of shell coque_3d elements
      This contribution is an dynamic analysis of a plate modelled by shell -coqued_3d- elements
      key words:
      • use of Salome: definition of geometry, mesh - export of mesh
      • use of ASTK
      • conversion of tria6, quad8 to tria7 and quad9 (note the difference between CAster vs9 and vs10)
      • projection of results of quad9 and tria7 to quad8 and tria6 for coque_3d elements
      • definition of:
        • shell characteristics: epais - thickness, excentrement - eccentricity, local coordinate system: vecteur, angl_rep
        • mass, stiffnes matrix and range of dof, NUME_DDL
        • definition of eigenvalue extraction -
      • print mass table
  2. Static analysis of shell construction
    • Contribution in collaboration with Brigde.
      Concrete shell with several partitions loaded by pressure.
      Extraction of displacement and stresses.
      Contrib:KeesWouters/shell/static
  3. Static shell analysis - generation of tables
    • Contribution in collaboration with Brigde.
      Concrete shell with several partitions loaded by pressure.
      Focus on extraction of minimum and maximum displacements, forces and moments and stresses.
      Contrib:KeesWouters/shell/tables
  4. Plot results of shell COQUE_3D calculations
    • The centre node of COQUE-3D elements is a headache in postpro.
      Projecting the results to a mesh without centre nodes.
      Presented on a plate with four holes.
      Focus on displacements and stresses.
      Contrib:KeesWouters/shell/plotcoq3d (April 2013)
  5. Plot results of shell COQUE_3D calculations
  6. Static analysis of shell construction
  7. Connection between shells and solids - Liaisonmail
  8. Connection between shells and solids - Arlequin
  9. Partitioning of shell for areas
Retrieved from "http://www.caelinux.org/wiki/index.php?title=Contrib:KeesWouters/shell&oldid=8613"