Difference between revisions of "Contrib:KeesWouters/shell/plotcoq3d"
From CAELinuxWiki
Keeswouters (Talk | contribs) (Created page with "test") |
Keeswouters (Talk | contribs) m |
||
| Line 1: | Line 1: | ||
| − | + | =='''Post processing of COQUE-3D calcalation'''== | |
| + | In this contribution the main (and only) focus is on the postprocessing of the displacements and stresses of shell COQUE-3D elements. The centre nodes of tria7 and quad9 elements used for the discription of the displacements field of COQUE_3D poses some nasty problems in the postprocessing with Salome. To overcome this problem the results are projected on the original quadratic mesh without the centre node. | ||
| + | |||
| + | * preproccesing: | ||
| + | * definition of geometry in Salome | ||
| + | * partitioning of the geometry and groups | ||
| + | * meshing of the geometry | ||
| + | * definition of the groups | ||
| + | * (maybe: python script which makes editing much easier ...) | ||
| + | |||
| + | * static analysis with pressure or force applied on a group or nodes | ||
| + | |||
| + | * postprocessing: | ||
| + | * viewing displacement in Salome | ||
| + | * determination of stresses, see also [http://www.caelinux.org/wiki/index.php/Contrib:KeesWouters/shell/tables tables] | ||
| + | |||
| + | * interface ASTK | ||
| + | |||
| + | =='''Definition of the geometry'''== | ||
| + | planar shell | ||
| + | Geometry: <br> | ||
| + | * L = 11.38 m <br> | ||
| + | * Thickness = 0.55 m <br> | ||
| + | '''Loads:''' <br> | ||
| + | [type] [group] [value] <br> | ||
| + | * Presure1 (Fbot) = 29.5e3 Pa <br> | ||
| + | * Presure2 (Fmain)= 25.8e3 Pa <br> | ||
| + | * Presure3 (Ftop) = 24.3e3 Pa <br> | ||
| + | * Presure4 (Fcentre1,Fcentre2)= 182.6e3 Pa <br> | ||
| + | '''Boundary conditions:''' <br> | ||
| + | * Lbot (DX=0.0, DY=0.0, DZ=0.0) <br> | ||
| + | * Ltop (DZ=0.0) <br> | ||
| + | '''Material:''' <br> | ||
| + | Concrete <br> | ||
| + | * E = 32e9 Pa <br> | ||
| + | * Nu = 0.2 <br> | ||
| + | [[Image:Geom-01-big.gif]] <br> | ||
Revision as of 08:35, 27 April 2013
Post processing of COQUE-3D calcalation
In this contribution the main (and only) focus is on the postprocessing of the displacements and stresses of shell COQUE-3D elements. The centre nodes of tria7 and quad9 elements used for the discription of the displacements field of COQUE_3D poses some nasty problems in the postprocessing with Salome. To overcome this problem the results are projected on the original quadratic mesh without the centre node.
- preproccesing:
- definition of geometry in Salome
- partitioning of the geometry and groups
- meshing of the geometry
- definition of the groups
- (maybe: python script which makes editing much easier ...)
- static analysis with pressure or force applied on a group or nodes
- postprocessing:
- viewing displacement in Salome
- determination of stresses, see also tables
- interface ASTK
Definition of the geometry
planar shell
Geometry:
- L = 11.38 m
- Thickness = 0.55 m
Loads:
[type] [group] [value]
- Presure1 (Fbot) = 29.5e3 Pa
- Presure2 (Fmain)= 25.8e3 Pa
- Presure3 (Ftop) = 24.3e3 Pa
- Presure4 (Fcentre1,Fcentre2)= 182.6e3 Pa
Boundary conditions:
- Lbot (DX=0.0, DY=0.0, DZ=0.0)
- Ltop (DZ=0.0)
Material:
Concrete
- E = 32e9 Pa
- Nu = 0.2
