Difference between revisions of "Composite analysis"
From CAELinuxWiki
Line 30: | Line 30: | ||
[[Image:specimen2.png]] | [[Image:specimen2.png]] | ||
+ | |||
+ | Questions (Answers in discussion page please): | ||
+ | * What about the element size? | ||
+ | * 1/10 of the smallest side (1/100*1000) is enought? | ||
+ | * Units are not important, but: what unit do you preffer, m or mm? | ||
Revision as of 12:39, 23 March 2009
This page will be a place to share information involving composite analysis with code_aster. Any help and experience will be wellcame. Please, write comments, ideas, tips, ... in the discussion page. josefrancisco.lopezmarin@gmail.com
Contents
Specimen
Orthotropic materials
Fiber glass:
-
,
-
-
,
Foam:
Creating the mesh
GMSH
cs=60; Point(1)={0,0,0,cs}; Point(2)={1000/3,0,100,cs}; Point(3)={2000/3,0,100,cs}; Point(4)={1000,0,0,cs}; Spline(1)={1:4}; Extrude {0, 2000, 0} { Line{1}; Layers{20}; Recombine; }
Questions (Answers in discussion page please):
- What about the element size?
- 1/10 of the smallest side (1/100*1000) is enought?
- Units are not important, but: what unit do you preffer, m or mm?